Kingtech 10.1“ 1920x1200 Dual-LVDS TFT LCD | 1500 nits High Brightness with Touch, -30~80°C

Overview

PV101057W0245Z1-CO is a 10.1 inch 16:10 WUGA 1920X1200 TFT LCD module with 45PIN Dual LVDS interface. With 1500nits high brightness, -30℃~+80℃ ultra wide temperature range and built-in G+G Multi-point capacitive touch panel. Adopt side LED backlight, 8Bit 16.7M full color, widely used in industrial control, medical equipment, Outdoor Equipment, POS system, handheld terminal and smart home embedded devices.

1500 nits: No More "Unreadable in Sunlight"

Standard displays (250-400 nits) wash out under direct sunlight. At 1500 cd/m², this module stays crisp in warehouses, outdoor kiosks, vehicle cockpits, and hospital corridors with strong ambient light — eliminating shading hoods, added BOM cost, and "screen unreadable" field complaints.

Wide Temperature: -30°C to +80°C

Consumer-grade LCDs slow down, darken, and fail below 0°C. This module is rated for -30°C to +80°C, covering cold storage logistics, northern-climate outdoor equipment, and hot factory floors with a single SKU — simplifying qualification and inventory.

Dual-LVDS + Integrated Touch: Built for Industrial Integration

Dual-LVDS (Low-Voltage Differential Signaling) is the de facto standard for industrial and medical platforms, carrying 1920×1200 at 8-bit color depth:

• Noise immunity — differential signaling resists EMI in motor-driven environments

• Longer cable runs — signal integrity beyond RGB interface limits

• Broad compatibility — drops into most x86/ARM industrial mainboards

Touch is already on board: a glass-on-glass (G+G) capacitive panel driven by the ILI2511 controller arrives pre-integrated — saving BOM cost, assembly steps, and one more qualification cycle.

Reliability

• Operating temperature: -30°C ~ +80°C

• 1500 nits high-brightness backlight (single LED, side-light)

• Designed for medical, industrial, and outdoor duty cycles

• RoHS compliant

Specifications Table

Applications

Kingtech Factory Strength

Kingtech founded in 2003, KINGTECH is a professional provider of customized LCD module solutions, with products covering TFT LCDs, E-paper, AMOLED & PMOLED, and open frame displays (0.91-28.6 inches). Over 90% are custom-developed for industrial devices, medical equipment, POS systems, handheld terminals, smart home, e-bikes and electric vehicles.

• 20+ years of LCD supply chain expertise

• Long-term partnerships with BOSCH and DAIKIN

• Professional engineering team for customization

• ISO9001/ISO14001/IATF16949/ISO13485 certified facilities

• 99.8% first-pass yield (vs. 95% industry avg)

• 2000 PPM defect rate (vs. 3000 PPM avg)

• Authorized Innolux distributor with official support

Customized Service

• Cover Lens Bonding (AG/AF/AR optical bonding)

• Touch Panel Integration (PCAP capacitive touch + firmware)

• Interface Conversion (MIPI to LVDS/HDMI/eDP/RGB)

• Custom FPC (length, shape, pinout modification)

• Firmware Customization (init code, gamma tuning, color calibration)

• High Brightness Enhancement

• Wide Temperature Display Solution

FAQ

Q1: Why choose 1500 nits brightness?

A: If your equipment will ever sit in sunlight or strong ambient light — outdoor kiosks, warehouse floors, vehicle-mounted panels — 1500 cd/m² keeps the display readable without a shading hood. It is the single most common spec that eliminates "screen unreadable" field complaints.

Q2: What does the -30°C to +80°C range actually mean for my product?

A: It means the display works in unheated warehouses and cold storage without slowdown or darkening, and survives hot factory environments. One SKU covers both — you avoid qualifying separate cold-grade and standard-grade panels.

Q3: Will dual-LVDS work with my mainboard?

A: Dual-LVDS is the standard interface on most industrial x86/ARM platforms. If your board uses a different interface, we can adapt — interface customization is available.

Q4: The touch is already integrated — can I still customize it?

A: Yes. The standard module ships with G+G capacitive touch. Touch-free and custom cover-glass variants are available, including AG/AR coatings and logo printing (MOQ 500 pcs).

Q5: What are the price and lead time?

A: Unit price from €48.31 (MOQ 1 pc). Sample price €64.81. Production lead time is ~25 days for 1–100 pieces.

Q6: Do you support custom sizes or other technologies?

A: Yes — Kingtech's matrix spans 0.91" to 28.6" across TFT, AMOLED, and E-paper. If this spec is close but not exact, send your requirement and we will recommend the right panel.

Send us your application details or CAD drawing for a free feasibility check. With 20 years of LCD module experience, ISO 13485 & IATF 16949 quality systems, and 99% yield, Kingtech supports you from prototype to mass production.