Kingtech 3.5 inch LCD Module | 320x480 IPS TFT with GT911 Capacitive Touch, ILI9488, MCU/SPI/RGB

The 3.5 inch display module that stays readable from every angle — with touch built in.

The Kingtech PV035HV-CIA5007 is a 3.5 inch IPS TFT module with 320×480 resolution, an integrated GT911 capacitive touch screen and an ILI9488 driver — built for smart-home and bathroom control panels, handheld terminals and IoT HMI where standard screens lose contrast off-axis.

IPS full viewing angle — clear image from any angle, no contrast flip
Integrated G+G capacitive touch — GT911, 6H tempered glass, single FPC
320×480 resolution — sharp menus and data readouts on a 3.5" screen
MCU/SPI/RGB interfaces — drop-in for Arduino, ESP32, STM32 and Raspberry Pi projects
Wide temperature -20°C ~ +70°C — appliance and outdoor-adjacent environments covered
High-brightness option — up to 1000 nits for sunlight-readable versions

Typical applications: smart-home & bathroom control panels, water heater controls, handheld terminals, portable instruments, IoT HMI.

Overview

3-5-inch-ips-tft-display-320x480-capacitive-touch 1.jpg

The 3.5 inch TFT module is the practical choice for products that need a compact display with full-angle viewing and responsive touch. The PV035HV-CIA5007 pairs a 320×480 IPS panel with an integrated GT911 capacitive touch screen — so the UI stays crisp from any angle and touch feels like a smartphone, without adding a separate touch controller to your BOM.

It is designed for OEM integration: an ILI9488 driver with 8/9/16/18-bit MCU, SPI and RGB interfaces for MCU-based designs, a wide temperature range of -20°C to +70°C for appliances and portable devices, and a slim 3.65 mm profile for tight enclosures. This is not a bare display repackaged — it's an integrated LCD + touch module on a single FPC.

Specifications Table

3-5-inch-ips-tft-display-320x480-capacitive-touch 2.png

Parameter	Specification
Model No.	PV035HV-CIA5007-CO
Screen Size	3.5"
Resolution	320 (RGB) × 480
Display Type	TFT / IPS, transmissive, normally black
Color Depth	262K
Viewing Angle	All, 80°/80°/80°/80° (CR≥10)
Contrast Ratio	700:1 (typ.)
Brightness	350 cd/m² (typ.); 300 cd/m² with CTP; up to 1000 cd/m² on request
Driver IC	ILI9488 (COG)
Interface	8/9/16/18-bit 8080-MCU; 3/4-line SPI; 16/18-bit RGB (MIPI on request)
Touch Panel	G+G, GT911 (COF), I2C, 0.55mm tempered glass, ≥6H, transmittance ≥80%
Operating Temperature	-20°C ~ +70°C
Applications	Smart home, bathroom control, handheld terminal, IoT HMI, portable instrument
Customization	Cover glass, interface (incl. MIPI), brightness (up to 1000 nits), PCBA board (MOQ 500 pcs)

Product Feature

IPS Full Viewing Angle — Readable From Every Angle

Standard panels wash out and flip contrast off-axis. The PV035HV-CIA5007 is specified at 80°/80°/80°/80° (CR≥10), so the UI stays consistent whether the terminal is mounted on a wall, angled in a bathroom, or viewed by several people at once. Orientation is flexible — portrait or landscape — without redesigning the module.

Integrated Capacitive Touch — Smartphone Feel, One FPC

The G+G structure pairs a 0.55 mm tempered cover lens (≥6H hardness) with a GT911 controller in a COF package, communicating over I2C at 2.8–3.3 V. Because LCD and touch share a single FPC, your mainboard saves one connector and your assembly line saves one handling step.

320×480 Resolution — Dense, Readable UI

320×480 in 262K colors delivers menus, icons and data readouts with room to breathe on a 3.5" screen. 700:1 typical contrast and 69% NTSC gamut keep graphics rich and text sharp.

MCU-Friendly Interfaces — Fast Design-in

Drive it over 8-/9-/16-/18-bit parallel 8080-MCU, 3-/4-line SPI, or 16-/18-bit RGB — no video bridge, no application processor, no Linux. ILI9488 is one of the best-documented drivers in the Arduino/ESP32/STM32 ecosystem, so validation cycles stay short. Need MIPI? Interface conversion is available as a customization.

Wide Temperature Range — Works Where Standard Panels Struggle

Rated -20°C ~ +70°C operating and -30°C ~ +80°C storage, with 72-hour reliability testing at high/low temperature and humidity. One SKU covers appliance enclosures, cold installations and humid environments.

Built for OEM Integration

Slim 3.65 mm module thickness (excl. FPC), 48.96 × 73.44 mm active area, and a 50-pin 0.5 mm-pitch FPC shipped flat for easy handling. Options: high-brightness up to 1000 nits, MIPI conversion, custom FPC, cover glass and PCBA board.

Applications

Industry	Use Case
Smart toilet & bathroom control panels	IPS keeps the UI clear on angled installations; 6H glass stands up to humid, daily use
Smart-home control panels	Full-angle viewing and responsive touch; readable from across the room
Water heaters & appliances	Wide temperature range and slim footprint fit appliance enclosures
Handheld terminals & portable instruments	3.5" one-hand size; wide temperature and 6H glass for field use
IoT & device HMI	MCU direct drive, no application processor required
EV charging & accessory screens	Compact footprint with wide-temp tolerance for embedded secondary displays

About Kingtech

15-6-inch-1000-nits-high-brightness-lvds-lcd-module22.jpg

Founded in 2003, Kingtech is a professional provider of customized LCD module solutions, covering TFT, E-paper, AMOLED from 0.91" to 28.6". Over 90% of our products are custom-developed for industrial equipment, medical devices, POS systems and outdoor applications.

20+ years of LCD module supply chain expertise
IATF16949 / ISO 13485 certified quality systems
99% production yield
Professional engineering team for customization
4.8/5 supplier rating with ≥96% on-time dispatch

15-6-inch-1000-nits-high-brightness-lvds-lcd-module0.jpg

FAQ

Name: Kingtech 3.5 inch LCD Module | 320x480 IPS TFT with GT911 Capacitive Touch, ILI9488, MCU/SPI/RGB
Brand: Kingtech Group Co., Ltd.

Q1: Why choose an IPS panel for a 3.5 inch display module?

A: IPS delivers a full viewing angle (80°/80°/80°/80°) with stable colors and contrast from any position — essential for wall-mounted panels, bathroom terminals and shared displays where TN panels wash out off-axis.

Q2: What is the brightness with and without touch?

A: The bare LCD is 350 cd/m²; approximately 300 cd/m² after G+G touch lamination. Specify your ambient-light condition and we will size the right brightness tier.

Q3: Can I get a higher brightness version?

A: Yes. A high-brightness version up to 1000 cd/m² can be customized, including backlight and optical tuning for sunlight readability (MOQ 500 pcs).

Q4: Will the interface work with my mainboard?

A: The standard module supports 8/9/16/18-bit MCU, SPI and RGB — the most common MCU interfaces. If your board needs MIPI, we can convert the interface; send your pin map and we will confirm feasibility.

Q5: What are the MOQ and lead time?

A: MOQ is 1 piece for evaluation; standard lead time is ~31 days for 1–10,000 pcs. Larger programs are quoted individually.

Q6: Does it work in cold environments?

A: Operating range is -20°C to +70°C. LCD response time slows near the low end of the range — normal TFT behavior, not a defect.

CTA

Request a Quote | Order Sample | Contact an Engineer

Send us your application details or CAD drawing for a free feasibility check. With 20 years of LCD module experience, ISO 13485 & IATF 16949 quality systems, and 99% yield, Kingtech supports you from prototype to mass production. We respond within 48 hours.

Contact: Helen Wang —Email: Helen@kingtechlcd.com

| Kingtech — Professional Display Customization Expert Since 2003

Products

Get in Touch with Kingtech

TDT lCD display module ANOLED/OLED display module display module with board, display module with touch screen and lnnolux display for different applications.

Other Types of Standard Display